Publication

Semiconductor & Quantum Packaging Laboratory

Journal

2009 Electrical Characterization of Screen-Printed Conductive Circuit with Silver Nanopaste

페이지 정보

작성자 최고관리자 작성일 25-09-15 16:31

본문

Author
Jong-Woong Kim and Seung-Boo Jung
Journal
Japanese Journal of Applied Physics
Vol
48
Page
06FD14
Year
2009
IF
1.122

This study examined the effects of the sintering conditions on the microstructure and electrical characteristics of screen printed Ag patterns. A conducting paste containing Ag nanoparticles (73 wt %) was screen printed onto a quartz wafer and sintered under a range of conditions, e.g., sintering temperature of 150, 200, 250, and 300 °C, and time of 15, 30, 45, and 60 min. The microstructure and thickness profile of the sintered patterns was examined using an environmental scanning electron microscope and three-dimensional nano-scan viewer. A network analyzer and Cascade's probe system in the frequency range of 10 MHz to 20 GHz were also used to measure the S-parameters of the sintered Ag conducting patterns. The resistivity under the application of a direct current (DC) signal decreased with increasing temperature and time. From the measured S-parameters, the electrical losses decreased with increasing sintering temperature due to the formation of an interparticle neck after heat treatment at high temperatures. However, sintering at 200 °C had no significant effect on the return and insertion losses of the printed patterns.