Publication

Semiconductor & Quantum Packaging Laboratory

Journal

2009 Mechanical property evaluation of Sn-3.0Ag-0.5Cu BGA solder joints using high-speed ball shear test

페이지 정보

작성자 최고관리자 작성일 25-09-15 16:32

본문

Author
Sang-Su Ha, Jin-Kyu Jang, Sang-Ok Ha, Jong-Woong Kim, Jeong-Won Yoon, Byung-Woo Kim, Sung-Kyu Park and Seung-Boo Jung
Journal
Journal of Electronic Materials
Vol
38
Page
2489
Year
2009
IF
1.491

The traditional ball shear test is not suitable for evaluating joint reliability under drop loading, since the applied test speeds, usually lower than 5 mm/s, are well below the impact velocity applied to the solder joint in a drop test. The present study expands recently reported research by investigating the effect of thermal aging on the joint strength and fracture mode of Sn-3.0Ag-0.5Cu ball grid arrays during high-speed shear testing, with a shear height of 50 μm and a shear speed ranging from 0.01 m/s to 3 m/s. The test specimens were aged at 393 K for 1000 h. After reflow, a (Ni,Cu)3Sn4 intermetallic compound (IMC) layer was observed at the solder/Ni-P interface and the thickness of the IMC layer was increased through the aging process. The shear strength increased with increasing shear speed. The fracture surface of the solder joints showed three different fracture modes according to the shear speed and aging time. The fracture mode changed from ductile fracture to brittle fracture with increasing shear speed.